Class PWMSparkMax

All Implemented Interfaces:
Sendable, MotorController, SpeedController, AutoCloseable

public class PWMSparkMax
extends PWMMotorController
REV Robotics SPARK MAX Motor Controller with PWM control.

Note that the SPARK MAX uses the following bounds for PWM values. These values should work reasonably well for most controllers, but if users experience issues such as asymmetric behavior around the deadband or inability to saturate the controller in either direction, calibration is recommended. The calibration procedure can be found in the SPARK MAX User Manual available from REV Robotics.

  • 2.003ms = full "forward"
  • 1.550ms = the "high end" of the deadband range
  • 1.500ms = center of the deadband range (off)
  • 1.460ms = the "low end" of the deadband range
  • 0.999ms = full "reverse"
  • Constructor Details

    • PWMSparkMax

      public PWMSparkMax​(int channel)
      Common initialization code called by all constructors.
      Parameters:
      channel - The PWM channel number. 0-9 are on-board, 10-19 are on the MXP port