001/*----------------------------------------------------------------------------*/
002/* Copyright (c) 2008-2018 FIRST. All Rights Reserved.                        */
003/* Open Source Software - may be modified and shared by FRC teams. The code   */
004/* must be accompanied by the FIRST BSD license file in the root directory of */
005/* the project.                                                               */
006/*----------------------------------------------------------------------------*/
007
008package edu.wpi.first.wpilibj;
009
010import edu.wpi.first.wpilibj.hal.FRCNetComm.tResourceType;
011import edu.wpi.first.wpilibj.hal.HAL;
012
013/**
014 * Mindsensors SD540 Speed Controller.
015 */
016public class SD540 extends PWMSpeedController {
017  /**
018   * Common initialization code called by all constructors.
019   *
020   * <p>Note that the SD540 uses the following bounds for PWM values. These values should work
021   * reasonably well for most controllers, but if users experience issues such as asymmetric
022   * behavior around the deadband or inability to saturate the controller in either direction,
023   * calibration is recommended. The calibration procedure can be found in the SD540 User Manual
024   * available from Mindsensors.
025   *
026   * <p>- 2.05ms = full "forward" - 1.55ms = the "high end" of the deadband range - 1.50ms = center
027   * of the deadband range (off) - 1.44ms = the "low end" of the deadband range - .94ms = full
028   * "reverse"
029   */
030  protected void initSD540() {
031    setBounds(2.05, 1.55, 1.50, 1.44, .94);
032    setPeriodMultiplier(PeriodMultiplier.k1X);
033    setSpeed(0.0);
034    setZeroLatch();
035
036    HAL.report(tResourceType.kResourceType_MindsensorsSD540, getChannel());
037    setName("SD540", getChannel());
038  }
039
040  /**
041   * Constructor.
042   *
043   * @param channel The PWM channel that the SD540 is attached to. 0-9 are on-board, 10-19 are on
044   *                the MXP port
045   */
046  public SD540(final int channel) {
047    super(channel);
048    initSD540();
049  }
050}