public class TalonSRX extends PWMSpeedController
PWM.PeriodMultiplierkAnalogInputChannels, kAnalogOutputChannels, kDigitalChannels, kPCMModules, kPDPChannels, kPDPModules, kPwmChannels, kRelayChannels, kSolenoidChannels, kSystemClockTicksPerMicrosecondDEFAULT_SAFETY_EXPIRATION| Constructor and Description |
|---|
TalonSRX(int channel)
Constructor for a TalonSRX connected via PWM.
|
get, getInverted, pidWrite, set, setInverteddisable, Feed, getDescription, getExpiration, isAlive, isSafetyEnabled, setExpiration, setSafetyEnabled, stopMotorenableDeadbandElimination, free, getChannel, getPosition, getRaw, getRawBounds, getSmartDashboardType, getSpeed, getTable, initTable, setBounds, setDisabled, setPeriodMultiplier, setPosition, setRaw, setRawBounds, setSpeed, setZeroLatch, startLiveWindowMode, stopLiveWindowMode, updateTablecheckAnalogInputChannel, checkAnalogOutputChannel, checkDigitalChannel, checkPDPChannel, checkPDPModule, checkPWMChannel, checkRelayChannel, checkSolenoidChannel, checkSolenoidModule, getDefaultSolenoidModule, setDefaultSolenoidModuleclone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, waitdisable, stopMotorpublic TalonSRX(int channel)
Note that the TalonSRX uses the following bounds for PWM values. These values should work reasonably well for most controllers, but if users experience issues such as asymmetric behavior around the deadband or inability to saturate the controller in either direction, calibration is recommended. The calibration procedure can be found in the TalonSRX User Manual available from CTRE.
- 2.0004ms = full "forward" - 1.52ms = the "high end" of the deadband range - 1.50ms = center of the deadband range (off) - 1.48ms = the "low end" of the deadband range - .997ms = full "reverse"
channel - The PWM channel that the TalonSRX is attached to. 0-9 are on-board, 10-19 are
on the MXP port